Knowledge check

HazCom Quiz: Training, Labels and SDS Sections

Prefer to study first? Review the questions as flashcards.

  1. Question 1 of 15 Training

    When must HazCom training be provided?

    1. Once a year
    2. At initial assignment and when a new hazard is introduced
    3. Every two years
    4. Within 30 days of hire

    Correct answer: At initial assignment and when a new hazard is introduced

    Training is due at initial assignment and again whenever a new chemical hazard the employees haven't been trained on enters their work area. The standard sets no annual or fixed refresher interval.

    29 CFR 1910.1200(h)(1) Read: HazCom training requirements

  2. Question 2 of 15 Training

    When must a worker get retrained?

    1. When a new hazard is introduced
    2. When a new chemical is introduced
    3. Monthly
    4. After a hazardous spill

    Correct answer: When a new hazard is introduced

    Retraining is triggered by a new hazard, not a new product. Training may cover categories of hazards, so a new chemical whose hazards the workers already know doesn't require it. A chemical that brings a hazard they haven't been trained on does.

    29 CFR 1910.1200(h)(1) Read: HazCom training requirements

  3. Question 3 of 15 Training

    Who must receive HazCom training?

    1. Every employee, including office staff
    2. Workers who may be exposed under normal conditions or foreseeable emergencies
    3. Only employees who handle chemicals daily
    4. Supervisors only

    Correct answer: Workers who may be exposed under normal conditions or foreseeable emergencies

    The standard defines an employee as a worker who may be exposed under normal operating conditions or in foreseeable emergencies. Office workers who meet hazardous chemicals only in non-routine, isolated instances are not covered.

    29 CFR 1910.1200(c), “Employee” Read: HazCom training requirements

  4. Question 4 of 15 Training

    Employers shall provide employees with ___ information and training

    1. Effective
    2. Timely
    3. Occasional
    4. Worthwhile

    Correct answer: Effective

    The word is “effective.” Training has to work: employees should be able to explain the hazards and protective measures in their own work area, not just show they attended a session.

    29 CFR 1910.1200(h)(1) Read: HazCom training requirements

  5. Question 5 of 15 Labels

    Which statement about labels is correct?

    1. Hazardous chemical containers must be labeled, with limited exceptions such as a portable container for the immediate use of the worker who filled it
    2. Pipes are containers and must be labeled the same way
    3. Blank pictogram borders are allowed if a signal word is included
    4. OSHA requires labels only on flammable chemicals

    Correct answer: Hazardous chemical containers must be labeled, with limited exceptions such as a portable container for the immediate use of the worker who filled it

    Paragraph (f)(6) requires workplace containers of hazardous chemicals to be labeled, tagged or marked. The exceptions are narrow: stationary process containers may use signs or batch tickets instead (f)(7), and a portable container needs no label only when it's for the immediate use of the employee who filled it from a labeled container (f)(8). Pipes and piping systems are not containers under the standard.

    29 CFR 1910.1200(f)(6), (f)(7), (f)(8); (c), “Container” Read: Secondary container labeling

  6. Question 6 of 15 Labels

    True or false: alternative workplace labeling is required when you use a product other than for its intended purpose

    1. True
    2. False

    Correct answer: False

    False. Paragraph (f)(6) lets the employer choose either the full shipped-container label elements or an alternative: the product identifier plus words, pictures or symbols giving general hazard information. How the product is used doesn't trigger either option.

    29 CFR 1910.1200(f)(6)(ii) Read: Secondary container labeling

  7. Question 7 of 15 Classification

    Under HazCom, a "hazardous chemical" is one classified as a physical or health hazard, a simple asphyxiant, combustible dust, or…

    1. Hazard not otherwise classified (HNOC)
    2. Hazardous to the aquatic environment
    3. An NFPA rating of 4
    4. Any DOT-regulated material

    Correct answer: Hazard not otherwise classified (HNOC)

    Under HazCom 2024, a hazardous chemical is one classified as a physical hazard, a health hazard, a simple asphyxiant, combustible dust, or a hazard not otherwise classified. Environmental hazards, NFPA ratings and DOT status are not part of the definition.

    29 CFR 1910.1200(c), “Hazardous chemical” Read: Where OSHA HazCom diverges from UN GHS

  8. Question 8 of 15 GHS vs OSHA

    Which hazard type is recognized by GHS but not adopted by OSHA?

    1. Flammable liquids
    2. Hazardous to the aquatic environment
    3. Skin corrosion
    4. Combustible dust

    Correct answer: Hazardous to the aquatic environment

    OSHA didn't adopt the GHS environmental hazard classes, such as hazardous to the aquatic environment, because they fall outside its jurisdiction. Combustible dust is the reverse case: OSHA covers it, but it isn't a GHS hazard class.

    29 CFR 1910.1200(c); Appendix C Read: Where OSHA HazCom diverges from UN GHS

  9. Question 9 of 15 Pictograms

    Which GHS pictogram is not mandatory under OSHA HazCom?

    1. Exclamation mark
    2. Environment
    3. Health hazard
    4. Gas cylinder

    Correct answer: Environment

    GHS has nine pictograms and HazCom designates eight of them. The Environment pictogram isn't required on OSHA labels because OSHA didn't adopt the environmental hazard classes.

    29 CFR 1910.1200(c), “Pictogram”; Appendix C Read: All 9 GHS pictograms

  10. Question 10 of 15 Labels / SDS

    What are the two signal words?

    1. Danger & Caution
    2. Danger & Warning
    3. Warning & Notice
    4. Hazard & Warning

    Correct answer: Danger & Warning

    HazCom uses only two signal words: “Danger” for the more severe hazards and “Warning” for the less severe. If Danger appears on a label, Warning must not.

    29 CFR 1910.1200(c), “Signal word”; Appendix C.2.1.1 Read: SDS Section 2 and OSHA label elements

  11. Question 11 of 15 SDS sections

    Which SDS section lists the hazard classification, signal word, pictograms, and hazard and precautionary statements?

    1. Section 1
    2. Section 2
    3. Section 3
    4. Section 11

    Correct answer: Section 2

    Section 2, Hazard(s) identification, carries the hazard classification and the label elements: signal word, hazard statements, pictograms and precautionary statements, plus any hazards not otherwise classified.

    29 CFR 1910.1200(g)(2)(ii); Appendix D Read: SDS Section 2 and OSHA label elements

  12. Question 12 of 15 SDS sections

    A coworker is exposed to a chemical and becomes unconscious. Which SDS section do you check first?

    1. Section 2
    2. Section 4
    3. Section 8
    4. Section 11

    Correct answer: Section 4

    Section 4, First-aid measures, describes the response for each route of exposure, the most important symptoms, and whether immediate medical attention is needed. Call emergency services first, then use Section 4 while help is on the way.

    29 CFR 1910.1200(g)(2)(iv) Read: Reading an SDS during a spill or exposure

  13. Question 13 of 15 SDS sections

    You accidentally spill a chemical. Which SDS section tells you how to clean it up?

    1. Section 1
    2. Section 4
    3. Section 6
    4. Section 16

    Correct answer: Section 6

    Section 6, Accidental release measures, covers personal precautions, protective equipment, emergency procedures, and methods and materials for containment and cleanup.

    29 CFR 1910.1200(g)(2)(vi) Read: Reading an SDS during a spill or exposure

  14. Question 14 of 15 SDS sections

    You need the UN number and proper shipping name. Which SDS section?

    1. Section 1
    2. Section 9
    3. Section 14
    4. Section 15

    Correct answer: Section 14

    Section 14, Transport information, lists the UN number, UN proper shipping name, transport hazard class and packing group. OSHA requires the heading but doesn't enforce the content of Sections 12 to 15, which fall outside its jurisdiction.

    29 CFR 1910.1200(g)(2)(xiv); Note 2 to (g)(2) Read: SDS Section 14: transport information

  15. Question 15 of 15 Aerosols

    The following are gases under pressure except:

    1. Aerosols
    2. Liquefied gases
    3. Compressed gases
    4. All are gases under pressure

    Correct answer: Aerosols

    Appendix B.5 says aerosols and chemicals under pressure should not be classified as gases under pressure. Aerosols have their own hazard class in Appendix B.3. Compressed, liquefied, dissolved and refrigerated liquefied gases are the gases under pressure.

    29 CFR 1910.1200, Appendix B.5 (note to Table B.5.1); Appendix B.3 Read: Aerosols, chemicals and gases under pressure

This quiz is a self-check. It does not satisfy the training requirement in 29 CFR 1910.1200(h) on its own and does not issue a certificate.