Study cards

HazCom Flashcards: Training, Labels and SDS Sections

Ready to test yourself? Take the HazCom quiz and get a score.

  1. Card 1 of 28 Training
    Question

    When must HazCom training be provided?

    Answer

    At initial assignment and whenever a new hazard is introduced.

    Training is due at initial assignment and again whenever a new chemical hazard the employees haven't been trained on enters their work area. The standard sets no annual or fixed refresher interval.

    29 CFR 1910.1200(h)(1) Read: HazCom training requirements

  2. Card 2 of 28 Training
    Question

    When must a worker get retrained?

    Answer

    When a new hazard is introduced.

    Retraining is triggered by a new hazard, not a new product. Training may cover categories of hazards, so a new chemical whose hazards the workers already know doesn't require it. A chemical that brings a hazard they haven't been trained on does.

    29 CFR 1910.1200(h)(1) Read: HazCom training requirements

  3. Card 3 of 28 Training
    Question

    Who must receive HazCom training?

    Answer

    Workers who may be exposed under normal conditions or in foreseeable emergencies.

    The standard defines an employee as a worker who may be exposed under normal operating conditions or in foreseeable emergencies. Office workers who meet hazardous chemicals only in non-routine, isolated instances are not covered.

    29 CFR 1910.1200(c), “Employee” Read: HazCom training requirements

  4. Card 4 of 28 Training
    Question

    Employers shall provide employees with ___ information and training. What’s the missing word?

    Answer

    Effective.

    Training has to work: employees should be able to explain the hazards and protective measures in their own work area, not just show they attended a session.

    29 CFR 1910.1200(h)(1) Read: HazCom training requirements

  5. Card 5 of 28 Training
    Question

    Employees must be informed of the ___ and availability of the written HazCom program. What’s the missing word?

    Answer

    Location.

    Paragraph (h)(2)(iii) requires employees to be informed of the location and availability of the written hazard communication program, including the required list(s) of hazardous chemicals and the safety data sheets.

    29 CFR 1910.1200(h)(2)(iii) Read: HazCom training requirements

  6. Card 6 of 28 Written program
    Question

    What must a written HazCom program describe?

    Answer

    How the employer meets the requirements for labels and other forms of warning, safety data sheets, and employee information and training.

    Paragraph (e)(1) also requires a list of the hazardous chemicals known to be present, using product identifiers referenced on their SDSs, and the methods used to tell employees about the hazards of non-routine tasks and of chemicals in unlabeled pipes in their work areas.

    29 CFR 1910.1200(e)(1) Read: Written HazCom program requirements

  7. Card 7 of 28 Labels
    Question

    Which workplace containers of hazardous chemicals must be labeled?

    Answer

    All of them, with limited exceptions such as a portable container for the immediate use of the worker who filled it.

    Paragraph (f)(6) requires workplace containers of hazardous chemicals to be labeled, tagged or marked. The exceptions are narrow: stationary process containers may use signs or batch tickets instead (f)(7), and a portable container needs no label only when it's for the immediate use of the employee who filled it from a labeled container (f)(8). Pipes and piping systems are not containers under the standard.

    29 CFR 1910.1200(f)(6), (f)(7), (f)(8); (c), “Container” Read: Secondary container labeling

  8. Card 8 of 28 Labels
    Question

    True or false: alternative workplace labeling is required when you use a product other than for its intended purpose.

    Answer

    False.

    Paragraph (f)(6) lets the employer choose either the full shipped-container label elements or an alternative: the product identifier plus words, pictures or symbols giving general hazard information. How the product is used doesn't trigger either option.

    29 CFR 1910.1200(f)(6)(ii) Read: Secondary container labeling

  9. Card 9 of 28 Labels
    Question

    What six elements must the label on a shipped container of a hazardous chemical include?

    Answer

    Product identifier, signal word, hazard statements, pictograms, precautionary statements, and the name, U.S. address and U.S. phone number of the manufacturer, importer or other responsible party.

    These are the six elements in (f)(1)(i) through (vi). Hazards not otherwise classified don't have to be addressed on the shipped container label; they belong on the SDS.

    29 CFR 1910.1200(f)(1) Read: SDS Section 2 and OSHA label elements

  10. Card 10 of 28 Labels / SDS
    Question

    What are the two HazCom signal words?

    Answer

    Danger and Warning.

    HazCom uses only two signal words: “Danger” for the more severe hazards and “Warning” for the less severe. If Danger appears on a label, Warning must not.

    29 CFR 1910.1200(c), “Signal word”; Appendix C.2.1.1 Read: SDS Section 2 and OSHA label elements

  11. Card 11 of 28 Pictograms
    Question

    Which GHS pictogram is not mandatory under OSHA HazCom?

    Answer

    The Environment pictogram.

    GHS has nine pictograms and HazCom designates eight of them. The Environment pictogram isn't required on OSHA labels because OSHA didn't adopt the environmental hazard classes.

    29 CFR 1910.1200(c), “Pictogram”; Appendix C Read: All 9 GHS pictograms

  12. Card 12 of 28 Pictograms
    Question

    Which OSHA pictogram means acute toxicity (fatal or toxic)?

    Answer

    The skull and crossbones.

    It marks the acute toxicity categories whose hazard statements read “Fatal” or “Toxic.” The exclamation mark covers the less severe “Harmful” category, and it doesn't appear for acute toxicity when the skull and crossbones is on the label.

    29 CFR 1910.1200, Appendix C.4; C.2.1.2 Read: All 9 GHS pictograms

  13. Card 13 of 28 Classification
    Question

    Under HazCom, a “hazardous chemical” is one classified as a physical or health hazard, a simple asphyxiant, combustible dust, or what else?

    Answer

    A hazard not otherwise classified (HNOC).

    Under HazCom 2024, a hazardous chemical is one classified as a physical hazard, a health hazard, a simple asphyxiant, combustible dust, or a hazard not otherwise classified. Environmental hazards, NFPA ratings and DOT status are not part of the definition.

    29 CFR 1910.1200(c), “Hazardous chemical” Read: Where OSHA HazCom diverges from UN GHS

  14. Card 14 of 28 Classification
    Question

    Explosives, flammable aerosols, oxidizing gases and gases under pressure are examples of which type of hazard?

    Answer

    Physical hazards.

    HazCom defines a physical hazard by its effects, among them explosives, flammable gases, liquids and solids, aerosols, oxidizers, gases under pressure and, since HazCom 2024, chemicals under pressure and desensitized explosives. Appendix B sets the classification criteria.

    29 CFR 1910.1200(c), “Physical hazard”; Appendix B Read: Aerosols, chemicals and gases under pressure

  15. Card 15 of 28 Classification
    Question

    Acute toxicity Category 1 vs. Category 4: which is more severe?

    Answer

    Category 1.

    Hazard categories compare severity within a hazard class, and Category 1 is the most severe: for acute toxicity it covers the substances with the lowest LD50 values. NFPA 704 ratings run the other way, with 4 as the most severe, which is a common source of confusion.

    29 CFR 1910.1200(c), “Hazard category”; Appendix A, Table A.1.1 Read: Secondary container labeling

  16. Card 16 of 28 GHS
    Question

    What does GHS stand for?

    Answer

    The Globally Harmonized System of Classification and Labeling of Chemicals.

    It's the United Nations system that HazCom is built on. Paragraph (a)(1) says the standard is intended to be consistent with the GHS, primarily Revision 7.

    29 CFR 1910.1200(a)(1) Read: Where OSHA HazCom diverges from UN GHS

  17. Card 17 of 28 GHS vs OSHA
    Question

    Which hazard type is recognized by GHS but not adopted by OSHA?

    Answer

    Hazardous to the aquatic environment.

    OSHA didn't adopt the GHS environmental hazard classes, such as hazardous to the aquatic environment, because they fall outside its jurisdiction. Combustible dust is the reverse case: OSHA covers it, but it isn't a GHS hazard class.

    29 CFR 1910.1200(c); Appendix C Read: Where OSHA HazCom diverges from UN GHS

  18. Card 18 of 28 Aerosols
    Question

    Are aerosols classified as gases under pressure?

    Answer

    No.

    Appendix B.5 says aerosols and chemicals under pressure should not be classified as gases under pressure. Aerosols have their own hazard class in Appendix B.3. Compressed, liquefied, dissolved and refrigerated liquefied gases are the gases under pressure.

    29 CFR 1910.1200, Appendix B.5 (note to Table B.5.1); Appendix B.3 Read: Aerosols, chemicals and gases under pressure

  19. Card 19 of 28 Aerosols
    Question

    Which aerosol category did HazCom 2024 add?

    Answer

    Category 3, for non-flammable aerosols.

    Aerosols are now classified in one of three categories. Categories 1 and 2 are for aerosols with more than 1% flammable components by mass or a heat of combustion of at least 20 kJ/g. Chemicals under pressure is a separate hazard class in B.3.2, not an aerosol category.

    29 CFR 1910.1200, Appendix B.3.1.2; B.3.2 Read: Aerosols, chemicals and gases under pressure

  20. Card 20 of 28 SDS sections
    Question

    How many sections does a HazCom safety data sheet have?

    Answer

    16, in a set order.

    Paragraph (g)(2) lists the section numbers and headings in order, from Section 1, Identification, to Section 16, Other information, which includes the date of preparation or last revision. Appendix D sets the content of each section.

    29 CFR 1910.1200(g)(2); Appendix D Read: Reading an SDS during a spill or exposure

  21. Card 21 of 28 SDS sections
    Question

    Which SDS section lists the hazard classification, signal word, pictograms, and hazard and precautionary statements?

    Answer

    Section 2, Hazard(s) identification.

    It carries the hazard classification and the label elements: signal word, hazard statements, pictograms and precautionary statements, plus any hazards not otherwise classified.

    29 CFR 1910.1200(g)(2)(ii); Appendix D Read: SDS Section 2 and OSHA label elements

  22. Card 22 of 28 SDS sections
    Question

    A coworker is exposed to a chemical and becomes unconscious. Which SDS section do you check first?

    Answer

    Section 4, First-aid measures.

    It describes the response for each route of exposure, the most important symptoms, and whether immediate medical attention is needed. Call emergency services first, then use Section 4 while help is on the way.

    29 CFR 1910.1200(g)(2)(iv) Read: Reading an SDS during a spill or exposure

  23. Card 23 of 28 SDS sections
    Question

    You accidentally spill a chemical. Which SDS section tells you how to clean it up?

    Answer

    Section 6, Accidental release measures.

    It covers personal precautions, protective equipment, emergency procedures, and methods and materials for containment and cleanup.

    29 CFR 1910.1200(g)(2)(vi) Read: Reading an SDS during a spill or exposure

  24. Card 24 of 28 SDS sections
    Question

    You need the UN number and proper shipping name. Which SDS section has them?

    Answer

    Section 14, Transport information.

    It lists the UN number, UN proper shipping name, transport hazard class and packing group. OSHA requires the heading but doesn't enforce the content of Sections 12 to 15, which fall outside its jurisdiction.

    29 CFR 1910.1200(g)(2)(xiv); Note 2 to (g)(2) Read: SDS Section 14: transport information

  25. Card 25 of 28 SDS duties
    Question

    Who must obtain or develop a safety data sheet for each hazardous chemical?

    Answer

    Chemical manufacturers and importers.

    Under (g)(1) they must obtain or develop an SDS for each hazardous chemical they produce or import. Employers, in turn, must have an SDS in the workplace for each hazardous chemical they use.

    29 CFR 1910.1200(g)(1) Read: When a supplier hasn't sent an updated SDS

  26. Card 26 of 28 SDS duties
    Question

    When must safety data sheets be accessible to employees?

    Answer

    During each work shift, while they're in their work areas.

    Paragraph (g)(8) requires employers to keep SDSs readily accessible. Electronic access is allowed as long as it creates no barrier to immediate employee access.

    29 CFR 1910.1200(g)(8) Read: Reading an SDS during a spill or exposure

  27. Card 27 of 28 SDS updates
    Question

    After learning significant new hazard information, how long does the preparer have to update the SDS?

    Answer

    Three months.

    Paragraph (g)(5) requires the new information to be added to the SDS within three months. Labels have a longer window: six months under (f)(11)(i).

    29 CFR 1910.1200(g)(5); (f)(11)(i) Read: When a supplier hasn't sent an updated SDS

  28. Card 28 of 28 HazCom 2024
    Question

    Under HazCom 2024, when must employers finish updating workplace labels, the HazCom program and training for substances?

    Answer

    By November 20, 2026.

    That's the employer date for substances in (j)(2)(ii). For mixtures it's May 19, 2028 under (j)(3)(ii). OSHA extended the original compliance dates by four months in January 2026.

    29 CFR 1910.1200(j)(2)(ii), (j)(3)(ii) Read: HazCom 2024 deadlines

These flashcards are a study aid. They do not satisfy the training requirement in 29 CFR 1910.1200(h) on their own and do not issue a certificate.