A written hazard communication program is required by 29 CFR 1910.1200(e)(1) at every workplace where employees are, or may be, exposed to hazardous chemicals. It must describe how the employer meets the standard's label, safety data sheet, and training requirements, and it must include a list of the hazardous chemicals known to be present and the methods used to inform employees about non-routine tasks and unlabeled pipes. Multi-employer workplaces add three more elements.
The failures OSHA finds are rarely a missing binder. More often the binder exists but describes a plant that no longer exists: a chemical list that omits the drums in the back storeroom, product names that match neither the label nor the SDS, no mention of the contractor crews who clean the tanks, and an electronic copy that only the safety manager can open. Hazard communication was the second most frequently cited OSHA standard in OSHA's preliminary fiscal year 2026 ranking, and the written program is where an inspector starts testing everything else.
A written hazard communication program must describe how the employer will meet the requirements for labels, SDSs, and training, and must include a chemical list using SDS product identifiers and the methods for informing employees about non-routine tasks and unlabeled pipes. Employers whose chemicals may expose other employers' workers must also describe how they share SDS access, precautionary measures, and their labeling system. The program must be available to employees and OSHA on request. Source: 29 CFR 1910.1200(e).
01 - RequirementsWhat must a written hazard communication program include?
Paragraph (e) is performance-oriented. It does not prescribe a format, a length, or a template. It sets a floor of content and leaves the rest to the employer, which is why programs bought off the shelf so often fail: the required elements are site-specific by design.
| Provision | What the program must contain or do |
|---|---|
| (e)(1) | Be developed, implemented, and maintained at each workplace, and describe at least how the criteria in (f) labels and other forms of warning, (g) safety data sheets, and (h) information and training will be met. |
| (e)(1)(i) | A list of the hazardous chemicals known to be present, using a product identifier referenced on the appropriate SDS. The list may cover the whole workplace or individual work areas. |
| (e)(1)(ii) | The methods used to inform employees of the hazards of non-routine tasks and of chemicals in unlabeled pipes in their work areas. |
| (e)(2)(i)–(iii) | For multi-employer workplaces: how other employers get on-site access to SDSs, how they are told of precautionary measures for normal operations and foreseeable emergencies, and how they are told about the workplace labeling system. |
| (e)(3) | An existing program may be relied on if it meets the criteria of paragraph (e). |
| (e)(4) | Available on request to employees, their designated representatives, OSHA, and NIOSH, in accordance with 29 CFR 1910.1020(e). |
| (e)(5) | For employees who travel between workplaces during a shift, the program may be kept at the primary workplace facility. |
The phrase "at least describes how the criteria ... will be met" carries most of the weight. A program that says "the company will comply with OSHA labeling requirements" describes nothing. OSHA's HazCom enforcement directive for HCS 2024, CPL 02-02-079, Section X.E (effective May 19, 2026), lists what compliance officers expect the description to cover, and that list is the practical standard for a defensible program. Section 06 below sets it out.
02 - ScopeWho needs a written hazard communication program?
Every employer with employees who are exposed or potentially exposed to hazardous chemicals known to be present in the workplace. "Exposure" in 1910.1200(c) includes potential, accidental, or possible exposure, and the standard reaches any chemical present in a way that could expose employees under normal conditions of use or in a foreseeable emergency, per (b)(2). The directive adds two points that often surprise employers: a program is required whether the employer generates the hazard or another employer does, and a general contractor that uses no hazardous chemicals itself still needs a program and training if its employees are exposed to chemicals used by subcontractors.
Two operations fall under limited-scope provisions that do not include paragraph (e):
| Operation | Written HazCom program required? | What still applies |
|---|---|---|
| Production, maintenance, warehouse floor, and other general industry work areas | Yes | All of (e), (f), (g), and (h) |
| Laboratory operations covered by (b)(3), typically quality control and production labs | No; (b)(3) lists the only duties that apply | Keep incoming labels intact, maintain and give access to SDSs, and train under (h) except on the location of the written program |
| Research laboratories covered by the Laboratory standard, 29 CFR 1910.1450 | No HazCom program; a written Chemical Hygiene Plan under 1910.1450(e) instead | HazCom labels and SDSs under (f) and (g) if the lab ships chemicals |
| Sealed containers not opened under normal use (warehousing, retail, marine cargo handling) | No; (b)(4) lists the only duties that apply | Keep labels intact, keep SDSs received and obtain missing ones on employee request, train to the extent needed for a spill or leak |
| Pilot plants and specialty chemical manufacturing that looks like lab work | Yes | The directive treats these as manufacturing, fully covered by the standard |
The laboratory line is where most misreadings happen. The HCS and the Laboratory standard define "laboratory" differently, and the directive says that most quality control and production labs do not meet the 1910.1450 definition and are therefore covered by (b)(3) of the HCS (CPL 02-02-079, XI.D). Neither route requires a HazCom written program, but a QC lab inside a plant is usually surrounded by work areas that do. A site-wide program that simply leaves the lab out is fine; one that claims the lab exemption for the blending room next door is not.
03 - InventoryWhat goes on the hazardous chemical list?
Paragraph (e)(1)(i) requires a list of the hazardous chemicals known to be present, using a product identifier referenced on the appropriate SDS. The definition of product identifier in 1910.1200(c) explains why that matters: the identifier must permit cross-reference among the list, the label, and the SDS. The list is the index that lets an employee or an inspector get from a container to its data sheet.
The directive's inspection guidance turns that into three tests:
- Every chemical present, not just those in use. The inventory must include chemicals that are only stored. A drum of last year's coating in a back room counts.
- The identifier must match. The product identifier on the list must align with the SDS and the label. "Blue degreaser" on the list, "Solvent Cleaner 450" on the drum, and a supplier trade name on the SDS is a list that does not work.
- Facility-wide or by work area. Either is acceptable. Area lists are easier to keep current on large sites; a single list is easier to reconcile against purchasing records.
The list is also the employer's control point for SDS completeness. Paragraph (g)(8) requires an SDS in the workplace for each hazardous chemical, so every line on the list should map to a current SDS. When a supplier has not sent one, the gap belongs in the program's SDS procedure, discussed in what to do when a supplier has not provided an updated SDS.
Treating the purchasing system as the chemical list. A purchasing export lists what was bought, under the buyer's item name, including items that are not hazardous chemicals and missing anything that arrived as a sample or through a contractor. It can feed the list, but the program's list must use SDS product identifiers and reflect what is physically present.
04 - Non-routine workHow should the program cover non-routine tasks and unlabeled pipes?
Paragraph (e)(1)(ii) requires the program to state the methods the employer will use to inform employees of the hazards of non-routine tasks, with the cleaning of reactor vessels as the standard's own example, and the hazards of chemicals in unlabeled pipes in their work areas. Pipes are excluded from the definition of "container" in (c), so they need no HazCom label, but this paragraph moves the duty into the program rather than removing it.
"Methods" means a mechanism, not a sentence. Programs that hold up usually tie non-routine tasks to an existing control: the work permit, the confined space entry permit, or the pre-job briefing for shutdown and turnaround work, with a step that requires reviewing the SDSs for the residues, cleaning agents, and process chemicals involved. For pipes, the usual methods are line lists or piping diagrams in the work area, pipe markings applied voluntarily, and training on what each line carries.
The SDS sections an employee needs during that kind of work are the same ones needed when something goes wrong; the SDS spill and exposure guide maps them.
05 - ContractorsWhat does a multi-employer workplace add to the program?
Paragraph (e)(2) applies to any employer that produces, uses, or stores hazardous chemicals in a way that may expose another employer's employees, such as an on-site construction contractor. That employer's program must also describe:
- How it gives the other employers on-site access to SDSs for each hazardous chemical their employees may be exposed to, (e)(2)(i).
- How it informs them of precautionary measures needed during normal operating conditions and in foreseeable emergencies, (e)(2)(ii).
- How it informs them of the workplace labeling system, (e)(2)(iii).
The directive clarifies that the host does not have to physically hand SDSs to each contractor. It must tell them where the SDSs are kept (its example is the general contractor's trailer), and the standard leaves the method of exchange to the employers. The duty runs both ways: a contractor bringing its own coatings, solvents, or cleaning agents onto the site exposes the host's employees and needs the same three elements in its own program. The directive points compliance officers to the multi-employer citation policy, CPL 02-00-124, when deciding which employer to cite.
Temporary staffing is the same problem from the training side. The HazCom training requirements guide covers how host employers and staffing agencies split (h) duties.
The labeling-system disclosure is easy to forget. A contractor crew trained on full shipped-container labels may not know what the host's in-house labels, color codes, or NFPA or HMIS ratings mean. Paragraph (e)(2)(iii) exists for exactly that gap, and a single line in the contractor orientation that explains the host's labeling system is usually enough to close it.
06 - ContentWhat should the program say about labels, SDSs, and training?
Paragraph (e)(1) only says the program must describe how (f), (g), and (h) will be met. The directive tells compliance officers what that description should address. It is the closest thing to an official outline for a written hazard communication program.
| Area | What the program should describe |
|---|---|
| Labels, (f) | Who is responsible for labels on shipped containers and for workplace labels; the labeling system used; any alternative to labels for workplace containers, such as (f)(7) process documentation; and the procedure for reviewing and updating label information. |
| Safety data sheets, (g) | Who obtains and maintains SDSs; how they are kept (computer, binders in the work area, a truck at the job site, a third-party service); how to retrieve them electronically and the backup if the system fails; how employees get access; what to do when an SDS does not arrive with the first shipment or appears incomplete; how currency is checked; and, for manufacturers and importers, how SDSs are updated when significant new information is found. |
| Training, (h) | Who conducts training; how it is delivered; the required (h)(1)–(h)(3) elements, including training in a language and at a literacy level employees understand; procedures for new hires and for new hazards; and training for employees exposed to other employers' chemicals. |
Two items on that list are worth singling out because they rarely appear in template programs. The first is the electronic SDS backup: if the program relies on a tablet or an online library, it must say what happens when the network is down, because (g)(8) permits electronic access only where it creates no barrier to immediate employee access. The second is the label-update procedure. Paragraph (f)(11)(i) requires labels to be revised within six months of learning of significant new hazard information, and the program is where that trigger and its owner are written down. For the workplace label formats themselves, see the secondary container labeling guide.
07 - AccessWhere must the written program be kept, and who can see it?
The standard does not say how the program is maintained, only that it is maintained at each workplace and made available on request. The directive confirms that paper and electronic formats are both acceptable if the program otherwise meets the standard, and adds that employees must know how to reach it and face no barriers, giving a locked room, cabinet, or computer as examples.
- Who can request it. Employees, their designated representatives, OSHA, and NIOSH, under (e)(4).
- How fast. Paragraph (e)(4) incorporates 29 CFR 1910.1020(e). The directive reads that as requiring a copy no later than 15 working days after the request. Under 1910.1020(e)(1)(i), an employer that cannot meet that window must explain the delay and give the earliest available date within the 15 days.
- Traveling employees. Under (e)(5), employees who work at more than one location during a shift may rely on a program kept at the primary facility. The parallel SDS provision, (g)(9), adds that such employees must be able to obtain SDS information immediately in an emergency.
- Employee awareness. Training must cover the location and availability of the written program, the chemical list, and the SDSs, under (h)(2)(iii).
08 - HazCom 2024When must the written program be updated for HazCom 2024?
HazCom 2024 did not change the text of paragraph (e). It changed the classifications, labels, and SDSs that the program points to, and paragraph (j) gives employers dates for catching up. The compliance dates were extended by four months in the January 15, 2026 rule (91 FR 1695); the current schedule in the eCFR text is:
| Provision | Who | Deadline | What changes |
|---|---|---|---|
| (j)(2)(i) | Manufacturers, importers, distributors (substances) | 05/19/26 | Comply with all modified provisions, including reclassified labels and SDSs |
| (j)(2)(ii) | All employers (substances) | 11/20/26 | As necessary, update workplace labeling, the hazard communication program, and training for newly identified hazards |
| (j)(3)(i) | Manufacturers, importers, distributors (mixtures) | 11/19/27 | Comply with all modified provisions for mixtures |
| (j)(3)(ii) | All employers (mixtures) | 05/19/28 | As necessary, update workplace labeling, the hazard communication program, and training for newly identified hazards |
The directive is explicit about how far this reaches: in most cases enforcement of the written program is not affected by the HCS 2024 implementation dates, but where updated information from manufacturers, importers, or distributors changes what the program must say, employers must update it by November 20, 2026 for substances and May 19, 2028 for mixtures. In practice that means three edits: the chemical list (new product identifiers on revised SDSs), the labeling description (if the workplace labeling system must now convey new hazards), and the training description (if new hazards require additional training). The HazCom 2024 employer checklist walks through the label and training sides of the same dates.
The cross-reference in (j). Paragraphs (j)(2)(ii) and (j)(3)(ii) refer to "the hazard communication program required by paragraph (h)(1)." The written program is required by (e)(1), not (h)(1), which sets the training duty. The directive's Section X.E applies these dates to the written program, so the practical reading is clear, but expect to see both paragraphs referenced in correspondence.
09 - EnforcementHow does OSHA inspect and cite the written program?
Compliance officers review the written program to see whether every applicable requirement of (e), (f), (g), and (h) is covered and actually implemented, and then test it during the walkaround. The directive's citation guidance distinguishes four situations:
| Finding | How the directive says to cite it |
|---|---|
| Labels, SDSs, chemical inventory, and training all in place, but nothing in writing | No (e)(1) citation; treated as de minimis |
| Written program exists but a required element is missing or deficient | Cite the specific element, for example (e)(1)(i) when there is no chemical inventory |
| No written program and other parts of the HCS not implemented | (e)(1), grouped with the unmet provisions, for example (g)(8) for SDSs not maintained |
| Employer has done nothing to comply | Separate items with separate penalties, normally (e)(1), (f)(6), (g)(1), and (h)(2) and (h)(3) |
| Multi-employer element missing | (e)(2)(i), (e)(2)(ii), or (e)(2)(iii) as applicable |
| Program not provided within the 1910.1020 time limits after a request | (e)(4) |
Written-program citations are generally issued as serious under the directive, which references OSHA's paperwork and written program citation policy, CPL 02-00-111. The de minimis rule is the telling detail: OSHA cares far more about whether the program is implemented than whether it is typed. A polished document with a stale chemical list is a citable deficiency; a complete, functioning system that was never written down is not, though it is still worth writing down.
The written program is judged by whether the plant matches it, not by how complete it looks on paper.
10 - ChecklistWritten hazard communication program review checklist
- Walk the inventory. Reconcile the chemical list against what is physically present in every work area and storeroom, including samples and contractor-supplied products, and record each item under its SDS product identifier.
- Match list, label, and SDS. For each line, confirm the same identifier appears on the container label and a current SDS on file.
- Name the owners. Record who is responsible for shipped-container labels, workplace labels, SDS collection and currency, and training.
- Describe real methods. Replace "will comply" language with the actual labeling system, SDS storage and backup, and training delivery and language approach used on site.
- Close the non-routine gap. Tie non-routine tasks to the permit or pre-job briefing that triggers an SDS review, and document how employees learn what unlabeled pipes carry.
- Add the contractor section. State where contractors find SDSs, how precautionary measures are communicated, how the labeling system is explained, and how you obtain the SDSs for chemicals contractors bring in.
- Test access. Ask an employee on each shift to find the program and an SDS without help; confirm a copy can be produced within 15 working days of a request.
- Apply the HazCom 2024 updates. For substances whose supplier SDS changed, update the list, labeling description, and training description by November 20, 2026; queue mixtures for May 19, 2028 or earlier when revised SDSs arrive.
11 - DecisionsDecision rules for the written program
Assume you need one. If any employee may be exposed to a hazardous chemical at a workplace, a written program is required unless the operation is limited to (b)(3) laboratory work or (b)(4) sealed-container handling.
Write one per workplace. A corporate program is fine as a base under (e)(3), but each workplace needs its own chemical list, owners, and methods.
Use the SDS product identifier everywhere. If the list, the label, and the SDS use different names, the cross-reference required by the (c) definition fails.
Count contractors in both directions. Add the (e)(2) elements whenever your chemicals can reach another employer's workers, and get SDSs for chemicals they bring onto your site.
Let revised SDSs drive revisions. A changed supplier classification updates the list, labeling, and training sections, by November 20, 2026 for substances and May 19, 2028 for mixtures under HazCom 2024.
Prove access, not storage. Paper or electronic is your choice; what OSHA tests is whether employees can reach the program and SDSs without barriers, and whether you can produce a copy on request.
Build the training section with the HazCom training requirements guide, define the labeling system with the secondary container labeling guide, and plan the dated updates with the HazCom 2024 employer checklist. To check what employees remember about the program, use the HazCom flashcards or the HazCom quiz.
Primary sources
- 29 CFR 1910.1200, Hazard Communication: (b)(1)–(b)(4), (c) definitions, (e), (f)(11), (g)(8)–(g)(9), (h)(2)–(h)(3), (j)
- 29 CFR 1910.1020(e), Access to employee exposure and medical records
- 29 CFR 1910.1450(e), Chemical hygiene plan (Laboratory standard)
- OSHA Instruction CPL 02-02-079, Inspection Procedures for the Hazard Communication Standard (HCS 2024), signed April 30, 2026, effective May 19, 2026: Sections X.B.5, X.E, and XI.D
- 91 FR 1695, Hazard Communication Standard compliance date extension, January 15, 2026
- OSHA, Top 10 Most Frequently Cited Standards, preliminary fiscal year 2026 data
Written by the Chemply Regulatory Team. Primary sources were checked November 15, 2026.
This is general regulatory information, not legal advice. State Plan states may adopt their own hazard communication rules and enforcement procedures; confirm requirements for your jurisdiction.